Black Hardcoat Anodizing Services of Aluminum Firearm Components
![1](https://mmfinc.com/hs-fs/hubfs/1.png?width=100&height=100&name=1.png)
![4](https://mmfinc.com/hs-fs/hubfs/4.png?width=100&height=100&name=4.png)
![5](https://mmfinc.com/hs-fs/hubfs/5.png?width=100&height=100&name=5.png)
![3](https://mmfinc.com/hs-fs/hubfs/3.png?width=100&height=100&name=3.png)
![2-2](https://mmfinc.com/hs-fs/hubfs/2-2.png?width=100&height=100&name=2-2.png)
![black-hardcoat-anodizing-of-firearm-components2 black-hardcoat-anodizing-of-firearm-components2](https://mmfinc.com/hs-fs/hubfs/black-hardcoat-anodizing-of-firearm-components2.jpg?width=398&height=300&name=black-hardcoat-anodizing-of-firearm-components2.jpg)
![custom-aluminum-anodizing-of-firearm-components-thumb custom-aluminum-anodizing-of-firearm-components-thumb](https://mmfinc.com/hs-fs/hubfs/custom-aluminum-anodizing-of-firearm-components-thumb.jpg?width=399&height=300&name=custom-aluminum-anodizing-of-firearm-components-thumb.jpg)
![custom-anodizing-of-gun-components-thumb custom-anodizing-of-gun-components-thumb](https://mmfinc.com/hs-fs/hubfs/custom-anodizing-of-gun-components-thumb.jpg?width=399&height=300&name=custom-anodizing-of-gun-components-thumb.jpg)
The firearm components shown here had a black hardcoat anodized coating applied because of its strength and durability demand. The components, which measured less than 12" in length, were manufactured from 7075-T6 & 6061-T6 aluminum. The anodizing process, which was in conformance with MIL-A-8625, Type III - Class 2 and MIL PRF-46147C, was performed using our dedicated grit blast department and rack hardcoating anodizing line.
The parts were initially prepped with media (grit) blasting, to ensure a non-reflective finish. This was followed by Hardcoat anodizing dying the part black and then a superior sealing process, which included various in process testing methods. We applied a dry film lubricant to the gun components where required. To learn more see the table below or contact us directly.
![firearm-components-thumb](https://mmfinc.com/hs-fs/hubfs/firearm-components-thumb.jpg?width=399&height=300&name=firearm-components-thumb.jpg)
Ready to get started?
HIGHLIGHTS OF THIS BLACK HARDCOAT ANODIZING PROJECT
- Product Description
- Firearm Components / Defense Market
- Black Hard Coat Anodizing Capabilities Applied/Processes
-
Hard Coat Anodizing
-
Media (Grit) Blasting
-
Dry Film Lubrication
- Equipment Used to Manufacture Part
- Dedicated Rack Hard Coat Anodizing Line
- Overall Part Dimensions
- Less than 12"
- Tightest Tolerances
- Meets Mil-Spec Tolerances
- Material Used
- Aluminum 7075-T6 & 6061-T6
- Material Finish
- Matte Black Hard Coat Finish - Non-Reflective
- Industry for Use
- Firearm
- Standards Met
- Customer Specifications
- MIL-A-8625F, Type III - Class 1 & 2
- MIL PRF-46147C
- Product Name
- Firearm Components
- In process testing/inspection performed
- In Process Testing & Final Inspection